Source apportionment of PAHs and n-alkanes in respirable particles in Tehran,Iran by wind sector and vertical profile

The vertical concentration profiles and source contributions of polycyclic aromatic hydrocarbons (PAHs) and n-alkanes in respirable particle samples (PM₄) collected at 10, 100, 200 and 300-m altitude from the Milad Tower of Tehran, Iran during fall and winter were investigated. The average concentrations of total PAHs and total n-alkanes were 16.7 and 591 ng/m³, respectively. The positive matrix factorization (PMF) model was applied to the chemical composition and wind data to apportion the contributing sources. The five PAH source factors identified were: ‘diesel’ (56.3 % of total PAHs on average), ‘gasoline’ (15.5 %), ‘wood combustion, and incineration’ (13 %), ‘industry’ (9.2 %), and ‘road soil particle’ (6.0 %). The four n-alkane source factors identified were: ‘petrogenic’ (65 % of total n-alkanes on average), ‘mixture of petrogenic and biomass burning’ (15 %), ‘mixture of biogenic and fossil fuel’ (11.5 %), and ‘biogenic’ (8.5 %). Source contributions by wind sector were also estimated based on the wind sector factor loadings from PMF analysis. Directional dependence of sources was investigated using the conditional probability function (CPF) and directional relative strength (DRS) methods. The calm wind period was found to contribute to 4.4 % of total PAHs and 5.0 % of total n-alkanes on average. Highest average concentrations of PAHs and n-alkanes were found in the 10 and 100 m samples, reflecting the importance of contributions from local sources. Higher average concentrations in the 300 m samples compared to those in the 200 m samples may indicate contributions from long-range transport. The vertical profiles of source factors indicate the gasoline and road soil particle-associated PAHs, and the mixture from biogenic and fossil fuel source-associated n-alkanes were mostly from local emissions. The smaller average contribution of diesel-associated PAHs in the lower altitude samples also indicates that the restriction of diesel-fueled vehicle use in the central area of Tehran has been effective in reducing the PAHs concentration.     

Presenting a conceptual pattern of HSE performance of oil trucks

Accidents are among the main problems in the oil product supply chain. The most important effective factors in these events are the kind of trucks used and their health, safety, and environment (HSE) condition. The aim of this study was to present a conceptual pattern of the HSE performance of oil trucks in oil industries. In this study, 20 truck models (with fixed tanks), in use over different periods of time, were investigated. In this regard, the criteria and sub-criteria were first determined in two parts—carrier and tank—and weighted by fuzzy analytical hierarchy process (FAHP). The results showed that the most important sub-criteria regarding the HSE factors of the carrier were resistance and strength of the front and rear shields, the brake system, and the ventilation system. The most important sub-criteria regarding the HSE factors of the tank were tank shell thickness and a good tank design shape with respect to portable material. It should be noted that the weight of the criteria with each other and sub-criteria with each other are not equal. This issue is important for decision-making. The main reason for the use of trucks with the lowest score in developing countries is the lack of attention by managers to safety issues and international standards and agreements such as the ADR.     

Mercury accumulation in selected tissues of shrimp Penaeus merguiensis from Musa estuary,Persian Gulf: variations related to sex,size, and season

The levels of mercury in tissues of Penaeus merguiensis from Musa estuary, northwest of the Persian Gulf, were investigated. This study assessed the relationship between mercury levels in hepatopancrea, gill, and muscle with sex, size, and season. The order of mercury concentrations in tissues of the shrimp P. merguiensis was as follows: hepatopancreas > gill > muscle. There was a positive correlation between mercury concentrations in shrimp species with sex and size of its food items. We expected to see higher mercury levels in tissues of female species because they are larger and can eat larger food items. Also, there was a positive correlation between mercury concentrations in shrimp species with its food source. Therefore, female species feed more on shrimp and plant and are contaminated with high levels of mercury. There was significant difference (p?<?0.05) in mercury levels between different seasons; higher mercury levels were found in July (summer season).     

Indirect forced solar drying of banana slices: phenomenological explanation of non-isotropic shrinkage and color changes kinetics

Solar drying technology is a noteworthy technique as it uses the renewable solar energy. In this study, thin slices of banana were dried by using an indirect forced solar dryer at air mass flow rates of 0.016, 0.041, and 0.082 kg s^?1. In order to assess the kinetics of shrinkage and color changes, image processing technique was applied for determining area, volume, density, total color difference and browning index. Shrinkage factor of the samples was less than 1 during drying indicating non-isotropic shrinkage with contraction of inner voids. Furthermore, product shrinkage showed two descending drying steps in which the volume change was more than the evaporated water volume in the first step and equal to that in the second step. The dimensionless evaporated water volume with respect to the dimensionless volume difference of the product also revealed that two steps of volume change existed during drying separated at critical moisture ratio 0.23. The area and volume changes were only related to the product moisture content and were independent of the air mass flow rate, and hence air temperature. In contrary to the browning index, the total color difference was not influenced by air mass flow rate and the least change in browning index occurred at mass flow rate of 0.041 kg s^?1.     

Sugarcane Bagasse Paper Reinforced by Cellulose Nanofiber (CNF) and Bleached Softwood Kraft (BSWK) Pulp

This study explores the effects of bleached softwood kraft pulp (BSWK) as a conventional reinforcing material in comparison with cellulose nanofiber (CNF) as an emerging bionanomaterial on the bleached soda sugarcane bagasse (BSSB) paper furnish. Cationic polyacrylamide was selected as a retention aid along with the CNF addition to retain it on fiber surfaces during the papermaking process. The results showed that though the effects of CNF were similar to those of BSWK in the most of properties but there were some important differences which can industrially be noticeable. In one hand, both of cellulosic elements, when substituted for the BSSB at the 5 or 10 % levels, gave increases in the paper strength, i.e. samples containing 10 % CNF yielded similar tensile strength (53 N m/g) and a more consolidated structure (14 % increment of the density) than those produced with 10 % BSWK. CNF addition had opposite effects on the air-permeability of the resulting paper. Unlike BSKW, the addition of CNF had a strong favorable effect on tear strength, but it was markedly slowed the rate of drainage time when it was especially added at 10 % level of the final furnish.     

Isotherm,kinetic, and thermodynamic studies for dynamic adsorption of toluene in gas phase onto porous Fe-MIL-101/OAC composite

Environmental Science and Pollution Research - In the present paper, micro-mesoporous Fe-MIL-101/OAC composite using in situ incorporation of Fe-MIL-101 into oxidized activated carbon was...     

Relationship between electric spark sensitivity and activation energy of the thermal decomposition of nitramines for safety measures in industrial processes

This study presents a new simple correlation between electric spark sensitivity of nitramines and their activation energies of thermolysis, which are important for safety measures in industrial processes. The new correlation can help to elucidate the mechanism of initiation of energetic materials by electric spark. It can be used to predict the magnitude of electric spark sensitivity of new nitramines, which is difficult to measure. The methodology assumes that electric spark sensitivity of a nitramine with general formula C_aH_bN_cO_d can be expressed as a function of its activation energy of thermal decomposition as well as optimized elemental composition and the contribution of specific molecular structural parameters. The new correlation has the root mean square and the average deviations of 1.37 and 1.09 J, respectively, for 21 nitramines with different molecular structures. The proposed new method is also tested for 16 nitramines so that there is no experimental data of electrostatic sensitivity for them.